Selection Guide

How to Choose an Active Harmonic Filter

Size an active harmonic filter (AHF) from measured harmonic currents. Confirm the target harmonic orders, compensation current and installation conditions.

Start with a measured baseline

Measure voltage, load current and the harmonic spectrum at the intended connection point. Capture representative light-load and peak-load periods, and record which major loads were running.

Define the compensation objective

Identify the dominant harmonic orders and the limits that apply to the project. Determine the required compensation current from measured conditions, considering variation across operating modes.

Confirm installation conditions

Check system voltage, wiring, CT placement and available cabinet space. Review any capacitor bank already in service and share the single-line diagram and measurements when asking for a selection review.

Technical references